Industrias America pull type Offset Discs are built tough with heavy square tubing frames and 1.5 axles. Gangs are adjustable for more or less aggressive cut. These disks come with 24" blades and scrapers standard. Greaseable bearings make for long equipment life. An offset disk is more suited to tearing up and chopping vs a Tandem disc that is more suited for finish discing.  Industrias America is a manufacturer in Mexico owned by Mennonites and produces good quality equipment. We have sold tis line for several years now and have great feedback from our customers. 

Industrias America pull type Tandem Discs are built tough with heavy square tubing frames and 1.5 axles. Gangs are adjustable for more or less aggressive cut. These disks come with 22" blades and scrapers standard. Greaseable bearings make for long equipment life. Industrias America is a manufacturer in Mexico owned by Mennonites and produces good quality equipment. We have sold tis line for several years now and have great feedback from our customers. 

The SM40 Danuser Hammer post driver is top of the line when it comes to post drivers. With an impact force of 82,000 lbs. this driver can drive T- posts to railroad ties with no problem. Stocked with all the options like grapple that lets one person pick up the post and drive it without getting off the machine. The tilt option that allows up to 20 degrees tilt left or right, and Extra weight kit for a total hammer weight of 500 lbs. With a 40" stroke and 35 strokes per minute post are in the ground in no time. The driver also has the ability to short stroke to fine tune a post to the exact height you're looking for. No extra plumbing in hydraulic return lines because this driver doesn't use a hydraulic cylinder and springs. It utilizes a hydraulic motor and chain that rotates constantly pulling the 500 lb. weight up to the top and letting it fall to pound the post in the ground with ease. These are the absolute best drivers on the market!

New Cherokee 3 point Tillers. Great tiller for you garden or food plot. We have these in stock ready to go to work. Prices and specs below. Plus tax or farm tax number.

TC-50 (50") 1700.00
TC-60 (59") 1800.00
Chain drive #80 chain
Slip Clutch protection
6 tines per flange, Hardened steel
Maximum 8" till depth
Adjustable tailgate to get you desired mulching result
374 and 412 lbs respectively
Minimum HP 15

MRT-063 (63") 1925.00
Gear drive
Slip Clutch protection
6 tines per flange, Hardened steel
Maximum 8" till depth
Adjustable tailgate to get you desired mulching result
661 lbs
Minimum HP 25

MRT-71 (71") 2300.00
Gear drive
Slip Clutch protection
6 tines per flange, Hardened steel
Maximum 8" till depth
Adjustable tailgate to get you desired mulching result
705 lbs
Minimum HP 32

RT-7 81" 2800.00
Gear drive
Slip Clutch protection
6 tines per flange Hardened steel
Maximum 8" till depth
Adjustable tailgate to get you desired mulching result
1023 lbs
Minimum HP 45

Parts availability is not a problem.